Nartel.us want to update the applicable standards for RFID products in Indonesia

RFID approval test will be based on national standard: KEPDIRJEN No.214/DIRJEN/2005 for RFID operation in 13.56 MHz, with the key parameters are as follows:

•  Radiated Emission Limits

• Error Frequency shall be below 50 KHz
•  The Transmission power shall be below 10mW (ERP)

Another kind of RFID approval test will be based on national standar: KEPDIRJEN No.221/DIRJEN/2007 for RFID Operated in 923 – 925 MHz, with the key parameters as follows:

•  Radiated Emmision Limits

• Tag utilized shall be passive tags
•  Total bandwidth utilization shall be 2 MHz with maximum hopping channel 500 KHz
•  The transmission power shall be below 2000mW (ERP)
•  Modulation technique: Frequency Hopping Spred Spectrum (FHSS)
•  Transmitter antenna shall be embedded with +/- 6 dBi, 5 Omega
•  Error Frequency: +/-20 ppm from center frequency
•  Communication ports:UART, RS-232, RS-485, USB, Serial, Parallel, LAN, WLAN, WAN
•  Receiver Sensitivity: max 28dBµV/m or -96dBm, with impedance input 50 Omega

Actually i have posted about the applicable standard for RFID products  in Indonesia. I hope that this information above will give you more detail information regarding to obtain for type approval in Indonesia

Related posts:

1. Bluetooth Type Approval Guide in Indonesia
2. Certification for Log Antenna periodic and Mini Repeater “Andrew products” by Suryajaya Teknotama
3. Certification of Andrew Products by PT. Anindotama Perkasa
4. typeapproval-indonesia.com
5. Indonesia Certification Fees